Countertops · Nashville, TN
Edges, Sinks & Cutouts in Nashville
Edge profiles, undermount sink reveals, faucet drilling and cooktop cutouts done in the shop, not on your floor.
Estimate request
Tell us about the job.
Straight to us, and a reply the same day.
Edges, Sinks & Cutouts in Nashville, Tennessee
Edge profiles, undermount sink reveals, faucet drilling and cooktop cutouts done in the shop, not on your floor.
Nashville's Countertops does edges, sinks & cutouts for homeowners across Middle Tennessee — licensed, insured, with the price in writing before the work starts. Countertop fabricators who template the actual cabinets, show you the slab, and put the seam where you can live with it.
Why homeowners call
The reasons people get in touch.
- Laminate lifting at the seams
- A burn or chip you work around
- Cabinets fine but tops are dated
- Want an island with seating
- Sink is too shallow to use
- Selling and the kitchen shows its age
What is included
What edges, sinks & cutouts covers.
- Eased, beveled, bullnose, ogee and mitered edge profiles
- Undermount sink installation with a polished reveal
- Farmhouse sink support and cabinet modification
- Faucet, soap and air-switch drilling
- Cooktop and downdraft cutouts with correct clearances
- Drainboards and integrated draining grooves
Edges, Sinks & Cutouts, in practice
The undermount reveal is the detail that separates good fabrication from adequate. A positive, negative or zero reveal is a deliberate choice, and an uneven one is the first thing you notice every time you use the sink.
Farmhouse sinks need the cabinet modified and supported before the top goes on. That is joinery work that happens before templating, and it belongs in the plan rather than being discovered on install day.
Also available
Other countertop installation services.
Quartz Countertops
Engineered, non-porous and consistent slab to slab. No sealing, and the pattern you choose is the pattern you get.
Learn moreGranite & Natural Stone
Every slab different, which is the point — come and choose the actual slab rather than a sample chip.
Learn moreTemplating & Fabrication
Digitally templated after cabinets are installed, with seams placed where you will not be looking at them.
Learn moreSlab & Waterfall Features
Full-height slab backsplashes, waterfall island ends and mitered edges where the stone is the feature.
Learn moreVanity & Bathroom Tops
Vanity tops, shower thresholds, window sills and laundry counters in matching or contrasting material.
Learn moreSurface Level
Worth reading before you book edges, sinks & cutouts.
September 28, 2026
Four-Inch Splash, Full-Height Slab or Tile
The backsplash is decided at the template visit, not after install. A short splash, a full slab and tile each ask different things of the wall and the electrician.
Read itSeptember 21, 2026
Undermount or Drop-In Sink With a New Countertop
An undermount sink is what most new stone countertops get, and it is the right call more often than not. The cases where a drop-in wins are specific and worth knowing.
Read itSeptember 14, 2026
Countertop Overhangs and When They Need Support
The bar overhang is where people lean, sit and set the groceries down. It is also the part of the countertop with nothing under it, and stone does not bend.
Read itService area
Countertops across all of Middle Tennessee.
Nashville and 64 more towns in 12 counties. Within about an hour of Nashville, we cover you.
FAQ
Edges, Sinks & Cutouts — questions
What edge profile should I choose?
A simple eased or pencil edge for a modern kitchen and for quartz, where a plain edge shows the material best; a bevel or a bullnose for a traditional one; ogee and other decorative edges for a look that suits the cabinetry. Thicker mitered edges make a slab look substantial. The edge is cut in the shop, and the profile is chosen from a sample rather than a name.
Undermount or drop-in sink?
Undermount for a clean counter you can wipe straight into the sink, and it is what most stone counters get. Drop-in for a laminate counter or a budget job. With an undermount the sink is fitted to the cutout in the shop and the reveal — how much of the sink rim shows — is chosen; the faucet holes are drilled at the same time.
Free estimate
Need edges, sinks & cutouts in Nashville?
Tell Nashville's Countertops what is going on and we will come back with a free written estimate. No obligation, no pressure.